ZyXEL Communications Prestige 642 - Manual (Page 94)

Prestige 642 ADSL Internet Access Router
IPX Configuration 6-9
The following table contains the instructions on how to configure the Edit IP Static Route Menu.
Table 6-3 Edit IPX Static Route Menu Fields
Field Description
Server Name In this field, enter the name of the server. This must be the exact name
configured in the NetWare server.
Network # This field contains the internal network number of the remote server that
you wish to access. [00000000] or [FFFFFFFF] are reserved.
Node # This field contains the address of the node on which the server resides. If
you are using a Novell IPX implementation, this value is [000000000001].
Socket # This field contains the socket number on which the server will receive
service requests. The default for this field is hex [0451].
Type # This field identifies the type of service the server provides. The default for
this field is hex [0004].
Gateway Node In this field, enter the number of the remote node that is the gateway for
this static route.
Hop Count and
Tick Count These two fields have the same meaning as those in the Ethernet setup.
Once you have completed filling in the menu, press [ENTER] at the message [Press ENTER
to Confirm…] to save your configuration, or press [Esc] to cancel to cancel.