ZyXEL Communications XGS-4528F - Manual (Page 198)

Chapter 23 Authentication & Accounting
XGS-4528F User’s Guide
198
23.3.2.2 Attributes Used for Accounting Exec Events
The attributes are listed in the following table along with the time that they are sent (the
difference between Console and Telnet/SSH Exec events is that the Telnet/SSH events utilize
the Calling-Station-Id attribute):
23.3.2.3 Attributes Used for Accounting IEEE 802.1x Events
The attributes are listed in the following table along with the time of the session they are sent:
Table 67 RADIUS Attributes - Exec Events via Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name D D D
NAS-Identifier D D D
NAS-IP-Address D D D
Service-Type D D D
Acct-Status-Type D D D
Acct-Delay-Time D D D
Acct-Session-Id D D D
Acct-Authentic D D D
Acct-Session-Time D D
Acct-Terminate-Cause D
Table 68 RADIUS Attributes - Exec Events via Telnet/SSH
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name D D D
NAS-Identifier D D D
NAS-IP-Address D D D
Service-Type D D D
Calling-Station-Id D D D
Acct-Status-Type D D D
Acct-Delay-Time D D D
Acct-Session-Id D D D
Acct-Authentic D D D
Acct-Session-Time D D
Acct-Terminate-Cause D
Table 69 RADIUS Attributes - Exec Events via Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name D D D
NAS-IP-Address D D D
NAS-Port D D D
Class D D D
Called-Station-Id D D D