ZyXEL Communications XGS-4528F - Manual (Page 269)

Chapter 33 VRRP
XGS-4528F User’s Guide
269
Click IP Application, VRRP and click the Configuration link to display the VRRP
Configuration screen as shown next.
"
You can only configure VRRP on interfaces with unique VLAN IDs.
"
Routing domains with the same VLAN ID are not displayed in the table
indicated.
Figure 154 IP Application > VRRP Configuration > IP Interface
The following table describes the labels in this screen.
Table 107 IP Application > VRRP Configuration > IP Interface
LABEL DESCRIPTION
Index This field displays the index number of an entry.
Network This field displays the IP address and number of subnet mask bit of an IP domain.
Authentication Select None to disable authentication. This is the default setting.
Select Simple to use a simple password to authenticate VRRP packet exchanges on
this interface.