ZyXEL Communications 1 - Manual (Page 106)

NetAtlas Enterprise 1.00 User’s Guide
105 Chapter 11 Switch Configuration
11.6.3 Link Aggregation ID
LACP aggregation ID consists of the following information:
Table 34 Aggregation ID Local Switch
Local switch [(0000,00-00-00-00-00-00,0000,00,0000)]
0000 00-00-00-00-00 0000 00 0000
System priority MAC address Key Port Priority Port Number
Table 35 Aggregation ID Peer Switch
Peer switch [(0000,00-00-00-00-00-00,0000,00,0000)]
0000 00-00-00-00-00 0000 00 0000
System priority MAC address Key Port Priority Port Number
11.6.4 Configuring Link Aggregation
1 In the Device Panel list, select a device and then right-click.
2 Click Configuration, Switch Configuration and then the Switch Setup tab.
3 Select the Link Aggregation check box and then click Apply.
4 Click Configuration, Switch Configuration and then the Link Aggregation tab to
display the following screen.
You can configure up to six link aggregation groups and each group can aggregate up to eight
ports.
Figure 77 Configuration: Switch Configuration: Link Aggregation