ZyXEL Communications 1 - Manual (Page 38)

NetAtlas Enterprise 1.00 User’s Guide
37 Chapter 1 Introducing the EMS
Figure 27 Map Object Properties
3 Follow the instructions in the table below to set the specified fields in the Map Object
Properties screen.
Table 3 Required Map Object Properties
FIELD VALUE
Read Access Mode “SNMPV2c”
Read/Write Access Mode “SNMPV2c”
Read Community field For initial configuration, “public” is the default for most devices.
After initial configuration, you assign this field.
Read/Write Community field For initial configuration, “public” is the default for most devices.
After initial configuration, you assign this field.
Note: For security purposes, we strongly recommend you change the Read
Community and Read Read/Write Community defaults.
Write down this information in a secure place so you will not forget it later!
4 Click OK.
After the device has been found, the icon and label appear in the network manager view
window.
5 Right-click on the device icon to view a set of SMNPc network manager shortcuts. Click
Properties to verify the information you entered in the previous step.