ZyXEL Communications 1 - Manual (Page 47)

NetAtlas Enterprise 1.00 User’s Guide
Chapter 2 EMS Main Window 46
If an alarm turns on, click the Port Status tab in the System Message Panel or proceed to
Section 5.1 on page 60 for hardware troubleshooting.
2.4 System Message Panel Port Status
Proceed to Section 5.4 on page 66 for information on the details displayed in this screen.
2.5 Menu Shortcut Buttons
The following is a brief overview of the menu shortcut buttons.
Figure 37 EMS Main Screen Shortcut Bar
2.6 EMS Main Menu Summary
This is a summary of the EMS menus in the main screen.
Table 7 EMS Menu Summary
MAP TEMPLATE STATUS PERFORMANCE FAULT MAINTENANCE TOOL
Add
Submap/
Device
VLAN
Template
Hardware Status Interface Event Log Firmware Upgrade Telnet
Edit Node STP Status Loopback Test Device Reset Web
Access
Search
Node
VLAN Status NE (Network
Element)
Configuration
Backup and Restore
Ping
Delete Port Status Load Factory Default
Refresh 802.1d Scheduled NE
Config Backup
Exit