ZyXEL Communications 1 - Manual (Page 111)

NetAtlas Enterprise 1.00 User’s Guide
Chapter 11 Switch Configuration 110
11.10 MAC Forwarding
This chapter discusses MAC address forwarding.
11.10.1 Introduction to Static MAC Forward Setup
A static MAC address entry is an address that has been manually entered in the MAC address
learning table. Static MAC addresses do not age out. When you set up static MAC address
rules, you are setting static MAC addresses for a port. Devices that match static MAC address
rules on a port can only receive traffic on that port and cannot receive traffic on other ports.
This may reduce unicast flooding.
11.10.2 Configuring Static MAC Forwarding
1 In the Device Panel list, select a device and then right-click.
2 Click Configuration, Switch Configuration and then the MAC Forwarding tab to
display the following screen.
Shared Secret Specify a password (up to 31 alphanumeric characters) as the key to be
shared between the external RADIUS server and the switch. This key is not
sent over the network. This key must be the same on the external RADIUS
server and the switch.
Apply Click Apply to save your changes back to the switch.
Table 39 Configuration: Switch Configuration: RADIUS
LABEL DESCRIPTION