F6:wave, F6]: wave – Yamaha EX5R User Manual

Page 144

Advertising
background image

144

Voice Mode

■ Sample Bank

Selects the desired sample bank. A different bank
can be selected for each element.

❏ Settings: PRE (Preset), RAM (DRAM), FLS (Flash

Memory)

FLS is effective only when an optional EXFLM1 is
mounted onto the EX5/5R/7.

■ Sample Number

Selects the desired sample number from the sample
bank. The category and sample name of the selected
sample number are displayed to the right of the
number. A different sample number can be selected
for each element.

❏ Settings: For more information about each sample, see the

separate Data List book.

■ Coarse Tune

Adjusts the pitch of the sample for each element, in
semitones.

❏ Settings: –64~+63

The setting exceeding the upper or lower limit of the
MIDI note number range (C–2~G8) is ineffective.

■ Fine Tune

Minutely adjusts the pitch of the sample of each
element.

❏ Settings: –64~+63

■ Pitch EG VelSens (PEG Velocity Sensitivity)

Sets the velocity sensitivity for the PEG. With
positive values the harder a note is played, the
greater the change in pitch. Negative values will
produce the opposite effect.

❏ Settings: –7~0~+7

■ Pitch EG Depth

Sets the amount of pitch change in the PEG. A
setting of “0” produces no change, and maintains the
original pitch.

❏ Settings: 0~127

[F6]: WAVE

Selects the element samples (maximum 128) that form
a voice, and determines Loop related settings for each
sample. A different value can be set for each element.

Although the menu name, WAVE is used here for the
Drum Voice like the Normal Voice, the Drum Voice
directly selects a sample, not a wave.

■ Drum key
■ Drum Layer
■ Sample Bank
■ Sample Number

These are the same parameters as those explained
for the TUNE screen. See page 143.

■ Start Offset

Sets the offset value for the point where the sample
sound actually begins.

❏ Settings: 0~65535

■ Loop Length Offset

Sets the end point for the sample loop (see diagram,
above).

❏ Settings: 0~65535

■ KeyOn Delay

Sets the amount of delay from when the key is
played until sound is produced.

❏ Settings: 0~127

Start

Loop Top

(Top point: fixed)

Loop Length

Loop End

(End point)

Data End

Loop
Length
Offset

Start
Offset

KeyOn
Delay

Key on

Voice/E.qx 5/21/98 11:31 AM Page 144

Advertising