Yamaha EX5R - Manual (Page 266)

Disk Mode
266
■ Synth All source data (From)
(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. A performance/voice file (128
Performances and 256 Voices) can be loaded. Move
the cursor to “All Data” and use [INC]/[DEC] to
select “Performance” (128 Performances) or “Voice”
(256 Voices). Furthermore, one performance/voice
can be designated and loaded. In this case, only a
specified performance/voice number will be replaced
with the newly loaded data.
■ Synth All destination data (To)
The destination that can be selected will differ
depending on the setting designated in “From.”
❏ Settings:
In an All Data, System data is included.
[F3]: VCE (Voice)
Loads a “Voice” file from the disk into the internal
memory. You can load all of the voices or only a
specified voice at a time.
The type of destination data
Device name/directory (source)
The type of source data
File type and file number/name (source)
Source data (From):
All Data
Performance & Voice
Performance All
001~128
Voice All
Bank I1~I2 (001~128)
Destination (To):
All Data
Performance & Voice
Performance All
001~128
Voice All
Bank I1~I2 (001~128)
■ Voice source data (From)
(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. A Voice file (256 Voices) can be
loaded. Furthermore, one voice can be designated
and loaded. In this case, only a specified voice
number will be replaced with the newly loaded data.
■ Voice destination data (To)
The destination that can be selected will differ
depending on the setting designated in “From.”
❏ Settings:
[F4]: WAVE
Loads a wave file from the disk into the internal
memory. You can load all of the wave data or only a
specified wave at a time.
■ Sample source data (From)
(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. All wave data can be loaded at a
time. Furthermore, one wave can be designated and
loaded. In this case, only a specified wave number
will be replaced with the newly loaded data.
The type of destination data
Device name/directory (source)
The type of source data
File type and file number/name (source)
Source data (From):
All Data
Voice Bank I1~I2 (001~128)
Destination (To):
All Data
Voice Bank I1~I2 (001~128)
Disk/E/qx 5/21/98 11:53 AM Page 266