Yamaha EX5R - Manual (Page 236)

Patter
n Mode
236
■ Measure
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ Rate
❏ Settings: 000%~100%~200%
■ Offset
❏ Settings: –99~+0~+99
5. Transpose
This job lets you transpose in semitones the notes in
the designated range of a specified pattern track.
For more information on functions and each parameter,
see page 217, Transpose in Song Job mode.
■ Track
❏ Settings: 1~8
■ Measure
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ Transpose
❏ Settings: –99~+0~+99
6. Shift Note
This job replaces all occurrences of a specified pitch
(within the designated range of the specified pattern
track) with some other pitch.
For more information on functions and each parameter,
see page 217, Shift Note in Song Job mode.
■ Track
❏ Settings: 1~8
■ Measure
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ FromNote
❏ Settings: C–2~G8
■ To Note
❏ Settings: C–2~G8
7. Crescendo
This job gradually increases or decreases the volume of
the pattern. This job produces the crescendo
(increasing) or diminuendo (decreasing) effect by
applying a gradual change to the velocity of a
designated range of a specified track.
For more information on functions and each parameter,
see page 217, Crescendo in Song Job mode.
■ Track
❏ Settings: 1~8
■ Measure
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ Range
❏ Settings: –99~+0~+99
Pattern/E/qx 5/21/98 11:44 AM Page 236