Yamaha EX5R - Manual (Page 268)

Disk Mode
268
■ Pattern destination data (To)
The destination that can be selected will differ
depending on the setting designated in “From.”
❏ Settings:
[F8]: ARP (Arpeggio)
Loads an arpeggio file from the disk into the internal
memory. Data such as Play Effects, Track Transmit
Channel and Controller data is included in an arpeggio
file.
■ Arpeggio source data (From)
(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. An arpeggio file (50 arpeggios)
can be loaded. Furthermore, one arpeggio can be
designated and loaded. In this case, only a specified
arpeggio number will be replaced with the newly
loaded data.
■ Arpeggio destination data (To)
The destination that can be selected will differ
depending on the setting designated in “From.”
❏ Settings:
Source data (From):
All Data
Arpeggio 51~100
Destination (To):
All Data
Arpeggio 51~100
The type of destination data
Device name/directory (source)
The type of source data
File type and file number/name (source)
Source data (From):
All Data
Pattern 1~50
Destination (To):
All Data
Pattern 1~50
[F3]: RNAM (File Rename)
This operation renames a file in a disk.
(If necessary, select a device beforehand) select the file
type and file number (name) you want to change, and
press [F7]: NAME to show the Name screen, then
input the new name. For more information on how to
name files, see page 263.
Once you input a file name, press [EXIT] to close the
Name screen and press [ENTER]. The confirmation
message “Rename File: Are you sure?” will be
displayed. Press [INC/YES] to execute the Rename
function or press [DEC/NO] to abort the operation.
A file can not be given a name that is identical to an
already existing file name.
[F4]: DEL (Delete)
This operation deletes a file in a disk.
(If necessary, select a device beforehand) select the file
type and file number (name) to delete, and press
[ENTER]. The confirmation message “Delete File: Are
you sure?” will be displayed. Press [INC/YES] to
execute the Delete function, or press [DEC/NO] to
abort the operation.
Device name/directory
File type and file number/name
File name to be changed (destination)
Device name/directory (source)
File type and
file number/name (source)
Disk/E/qx 5/21/98 11:53 AM Page 268