Xerox 575 - Manual (Page 138)

Transmitting Documents
5-34 WorkCentre Pro 555/575
To perform a ITU-T Relay Transmission:
1. Load the document face down in the Document Support.
2. Select the desired Resolution and Contrast.
3. Press:
4. Using the Numeric Keypad enter a relay box number, then press
Enter.
5. Select the Password option:
To assign a password, press and go to step 6.
If you do not want to assign a password, press and go to
step 7.
6. Using the Numeric Keypad, enter the password you want to
assign to this box, then press
Enter.
7. Enter the Speed Dial or One Touch key that you preset for the
Relay Station, (You must press
Phonebook then press Enter
before entering a speed dial number).
The document is sent to the Relay Station. The Relay Station will
then retransmit the document to the specified End Stations.
Note: A Password is required to receive to a Relay Box.
Menu
Box number (20 max)
[ ]
1.Yes
Set up password
2.No
Send(Relay)
Enter fax number