Xerox 575 - Manual (Page 50)

Programming the Machine
2-32 WorkCentre Pro 555/575
2. To setup the Master Department Code, press .
3. Using the Numeric Keypad, enter the name to assign to the
Master Department, then press
Enter.
4. Using the Numeric Keypad, enter the 5-digit master code to
assign to the Master Department, then press
Enter.
Note: To reset the Department Code, the following is displayed.
To recover the Department Code already being set, press
1 . To set a new Department Code, press 2 .
Note: If the Master Number is assigned, go to step 6 to set
additional Department Codes.
Note: Department code 01 is reserved for the Master Code.
Note: The 5-digit Master Code is required to access the
Department Code feature to perform any modifications.
Please remember your Master Code.
2.New
Set dept. code
1.Recover setting
Name (40 max)
[ ]
Master code
[ ]