Xerox 575 - Manual (Page 37)

Programming the Machine
WorkCentre Pro 555/575 2-19
Modifying or Deleting Speed Dial Numbers
Use this procedure to change or delete a previously assigned Speed
Dial number. When you enter the Speed Dial number you want to
change or delete, the “Already assigned” message displays.
To modify or delete a Speed Dial number:
1. Press:
2. Enter the Speed Dial number you want to modify or delete, then
press
Enter.
3. To delete the Speed Dial number, press .
To modify the number information, press .
To retain the number information, press .
Refer to the previous procedure, “Pre-setting Speed Dial
Numbers,” to update the speed dial information.
4. The “Speed Dial Number” screen redisplays. Press Exit or Stop
to return to the Standby Mode.
Note: When modifying a Speed Dial number that is tied to a One
Touch key, you do not have to re-apply the number to the
One Touch. If you do, the machine prompts you to
retain/delete the original one touch setting.
Menu
Speed Dial Number
(1-999) [ ]
2.Modify
1.Delete
Speed Dial Number
3.Retain
Already assigned