Setting the machine default settings, Error correct - ecm default setting, Setting the machine default settings -36 – Xerox 575 User Manual
Page 54: Error correct - ecm default setting -36
Programming the Machine
2-36
WorkCentre Pro 555/575
Setting the Machine Default Settings
Error Correct - ECM Default Setting
Error Correction Mode (ECM) is an internationally-recognized error
correction system. It enables communications with clean images
since it automatically re-sends any portion of the document affected
by line noise or distortion.
This feature cannot be accessed if a document is stored in memory.
•
Both the sender and the receiver must have the ECM feature to
perform ECM communications.
•
Communication time is longer when transmissions are affected
by interference.
To set the Error Correct-ECM default mode:
1.
Press:
2.
To enable ECM, press
.
To disable ECM, press
.
3.
The menu selection screen redisplays. Press
Exit or Stop to
return to the Standby Mode.
Note:
ECM must be set to On when the 33.6K BPS Modem is in
your machine.
Menu
2.Off
Error correct-ECM
1.On