Xerox 50 - Manual (Page 37)

DOCUMENT CENTRE CS 50 USER GUIDE 2–3 GETTING TO KNOW YOUR COPIER/PRINTER
1
3
4
5
6
7
2
Control Panel Buttons
The function of the Control Panel hard buttons is
described below. The numbers before the
descriptions correspond to the numbered call-outs
in Figure 3.
1 Numeric Keypad - Buttons 0 to 9 are used to
select a copy quantity up to the value set in the
Tools mode. These buttons are also used to enter
an access number.
2 Administration - This button is used by the
System Administrator. The System Administrator
uses this feature to make changes in the machine
defaults and to create or modify user access
numbers.
3 Auditron Access - The copier/printer can be
activated in either the normal copying mode
(without an access number) or in the Auditron
Access mode.
If the copier/printer is in the Auditron Access
mode, use the Auditron Access button to bring
up the Access screen and enter your access
number before trying to make any copies. Press
the Auditron Access button after you complete
your job to exit the user screens and ensure that
no one else can make copies using your access
number.
Figure 3: Control Panel buttons
1
2 3 4
5
6
7
8
9