Xerox 50 - Manual (Page 69)

DOCUMENT CENTRE CS 50 USER GUIDE 3–11 MAKING COPIES
1
2
4
5
6
7
3
– 2 to 2 Sided button for two-sided copies
from two-sided input.
Select the Side 2 Rotate button to display
the Side 2 Rotate screen, illustrated in
Figure 15. You must specify the original
orientation and the copy orientation.
Touch Right/Left open for two-sided,
head-to-head output (e.g., books). Touch
Top/Bottom open for two-sided, head-to-
toe output (e.g., calendars).
– 2 to 1 Sided button for one-sided copies
from two-sided originals, illustrated in
Figure 16. Touch Flip on Long Edge if
your original documents are two-sided,
head-to-head. Touch Flip on Short Edge
if your original documents are two-sided,
head-to-toe output.
NOTE: 2 to 2 Sided copying and 2 to 1 Sided
copying can only be applied when using the
DADF. You must follow the procedure for Manual
2 sided copying (chapter 5) if you want to use the
Document Glass for 2 to 2 Sided copying. For 2 to
1 Sided copying on the Document Glass, select 1
to 1 Sided and copy each side of the original
individually.
NOTE:
•
If you are not using a DADF, perform one of
the following:
– Touch the 1 Sided button for default one-
sided copies.
– Touch the 1 to 2 Sided button to display
the 2 Sided Copy screen. Under Side 2
Rotate, perform one of the following:
Touch Flip on Long Edge for two-sided,
head-to-head output (e.g., books).
Touch Flip on Short Edge for two-sided,
head-to-toe output (e.g., calendars).
Touch the button next to the icon that most closely
resembles the Original Orientation for the
document on the Document Glass.
Figure 15: Side 2 Rotate screen
Figure 16: 2 to 1 Sided Copying option