Xerox 50 - Manual (Page 46)

GETTING TO KNOW YOUR COPIER/PRINTER 2–12 DOCUMENT CENTRE CS 50 USER GUIDE
2
3
4
5
6
7
2
Audio tones
The copier/printer provides four types of audio
tones to assist the operator in using the copier/
printer. The System Administrator can adjust the
volume of some of the audio tones using Tools
mode.
•
When a selection is made, the copier/printer
beeps once when a button is touched to
acknowledge the input.
•
A triple beep tone sounds when a conflict
occurs between the selections already made
and the one being attempted. A triple beep
also occurs when a feature is not available.
•
The attention tone consists of a series of
longer beeps. The attention tone sounds
when the copier/printer warm-up cycle is
complete.
•
When a paper jam occurs or a paper tray runs
out of paper, the copier/printer will sound five
consecutive beeps. To resume a job, follow
the directions for clearing the jam or refilling
the paper tray as displayed on the copier/
printer screen or as described in Chapter 13.