Xerox 50 - Manual (Page 92)

BASIC COPYING 4–20 DOCUMENT CENTRE CS 50 USER GUIDE
2
3
4
5
6
7
4
Auto Tray Switching - Tools Mode
The Auto Tray Switching feature enables the
copier/printer to switch to another paper supply
when a tray runs out of paper. Auto Tray
Switching is activated when Auto Paper Supply is
selected and your System Administrator has
enabled paper trays 1, 2, 3, and 4.
NOTE: The trays must be loaded with the same
size paper in the same orientation (long edge feed
or short edge feed).
For example, trays 2 and 3 contain the same size
paper in the same orientation and the Tray 2
Paper Supply button on the Basic Copying tab of
the Touch Screen is selected. If, during a copy
job, Tray 2 should run out of paper, the copier/
printer will automatically begin drawing paper from
Tray 3.
For further information on this feature, see the
System Administration Guide, chapter 3, “Tools
Mode.”