Zebra Technologies Z4Mplus User Manual
Page 40
Advertising
Operations
Load Media in Tear-Off Mode
32
13163L-001 Rev. A
Z4Mplus/Z6Mplus User Guide
1/18/06
To load media in Tear-Off Mode, complete these steps:
1.
Set the printer to Tear-Off mode. See
for instructions.
2.
Insert media into the printer. See
Insert Media into the Printer on page 29
for instructions.
3.
Press the printhead release latch to open the printhead assembly. Lift the printhead until it
latches open.
4.
Slide out the media guide.
Advertising