Zebra Technologies Z4Mplus - Manual (Page 53)

45 Operations
Load Media in Rewind Mode
1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A
To load media in a printer that has the Rewind option, complete these steps:
1. Set the printer to Rewind mode. See Select Print Mode on page 75 for instructions.
2. Insert media in the printer. See Insert Media into the Printer on page 29 for instructions.
3. Press the printhead release latch to open the printhead assembly.
Peel-Off with
Liner Take-Up
Mode
1
2
3
4
5
6
10 9 12
13
14
7
8 11
15
1
Peel lever
9
Dancer
2
Printhead assembly
10
Media guide
3
Transmissive sensor
11
Media alignment spindle
4
Media supply guide
12
Rewind base assembly
5
Media supply hanger
13
Printhead release latch
6
Rewind spindle
14
Peel assembly
7
Rewind media guide
15
Label
8
Thumbscrew