ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 213)

P-793H User’s Guide
Chapter 15 Remote Management Configuration 213
Figure 103 Enabling TR-069
The following table gives a description of TR-069 commands.
ras> wan tr069 load
ras> wan tr069 acsUrl a.b.c.d
Auto-Configuration Server URL: http://a.b.c.d
ras> wan tr069 periodicEnable 1
ras> wan tr069 informInterval 2400
TR069 Informinterval 2400
ras> wan tr069 active 1
ras> wan tr069 save
Table 78 TR-069 Commands
Root
Command or
Subdirectory
Command Description
wan tr069 All TR-069 related commands must be preceded by wan
tr069.
load Start configuring TR-069 on your ZyXEL Device.
active [0:no/
1:yes] Enable/disable TR-069 operation.
acsUrl <URL> Set the IP address or domain name of CNM Access.
username
[maxlength:15] Username used to authenticate the device when making a
connection to CNM Access. This username is set up on
the server and must be provided by the CNM Access
administrator.
password
[maxlength:15] Password used to authenticate the device when making a
connection to CNM Access. This password is set up on the
server and must be provided by the CNM Access
administrator.
periodicEnable
[0:Disable/
1:Enable] Whether or not the device must periodically send
information to CNM Access. It is recommended to set this
value to 1 in order for the ZyXEL Device to send
information to CNM Access.
informInterval
[sec] The duration in seconds of the interval for which the device
MUST attempt to connect with CNM Access to send
information and check for configuration updates. Enter a
value between 30 and 2147483647 seconds.
save Save the TR-069 settings to your ZyXEL Device.