ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 289)

P-793H User’s Guide
Chapter 28 NAT Setup 289
Follow these steps to configure a server behind NAT:
1 Enter 15 in the main menu to go to Menu 15 - NAT Setup.
2 Enter 2 to open menu 15.2 (and configure the address mapping rules for the WAN port on
a ZyXEL Device with a single WAN port).
Figure 165 Menu 15.2: NAT Server Sets
3 Enter 1 to configure the server set used by SUA, or enter the number of the server set you
want to modify for full-feature NAT. In Menu 15.2 - NAT Server Setup, configure the
port forwarding rules.
Figure 166 Menu 15.2: NAT Server Setup
Menu 15.2 - NAT Server Sets
1. Server Set 1 (Used for SUA Only)
2. Server Set 2
3. Server Set 3
4. Server Set 4
5. Server Set 5
6. Server Set 6
7. Server Set 7
8. Server Set 8
9. Server Set 9
10. Server Set 10
Menu 15.2 - NAT Server Setup
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 0.0.0.0
2. 80 80 192.168.1.10
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 0 0 0.0.0.0