ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 228)

P-793H User’s Guide
228 Chapter 17 System
Figure 119 System > General
The following table describes the labels in this screen.
Table 80 System > General
LABEL DESCRIPTION
System Setup
System Name Choose a descriptive name for identification purposes. It is recommended you enter
your computer’s “Computer name” in this field. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes “-” and
underscores "_" are accepted.
Domain Name Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
Administrator
Inactivity Timer
Type how many minutes a management session (either via the web configurator or
CLI (Command Line Interpreter)) can be left idle before the session times out. The
default is 5 minutes. After it times out you have to log in with your password again.
Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Password
User Password If you log in with the user password, you can only view the ZyXEL Device status.
The default user password is user.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the ZyXEL Device.
Retype to
Confirm
Type the new password again for confirmation.
Admin Password In addition to the wizard setup, a user logs in with the admin password can also view
and configure the advanced features on the ZyXEL Device.