ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 46)

P-793H User’s Guide
46 Chapter 2 Introducing the Web Configurator
Figure 4 Login Screen
6 If you entered the user password, the Status screen appears. See Section 2.4 on page 50 .
If you entered the admin password, the following screen appears.
Figure 5 Change Password at Login
It is highly recommended you change the default admin password. Enter a new password
between 1 and 30 characters, retype it to confirm and click Apply; alternatively click
Ignore to proceed to the main menu if you do not want to change the password now.
Note: If you do not change the password at least once, this screen appears every
time you log in with the admin password. You can also change the password in
System > General or in Menu 23: System Password .
7 Select Go to Wizard setup, and click Apply to display the wizard main screen. Select
Go to Advanced setup, and click Apply to display the Status screen. Select Click here
to always start with the Advanced setup if you want the ZyXEL Device to skip this
screen from now on and always go to the Status screen. See
Section 2.4 on page 50 .