Operating sequence, Load the laundry, Measure out the detergent – Zanussi ZJD1219 User Manual

Page 11: Jetsystem» wash, Measure out the fabric softener, Switch the machine on, Select the required programme, Washing only

Advertising
background image

11

Operating Sequence

Washing only

Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.

1. Load the laundry

Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment

.

If you have selected the PREWASH option or the
SOAK programme, pour detergent into the
compartment marked

.

«JETSYSTEM» wash

As the Jetsystem is flexible and adjusts water intake
according to wash load size it is not possible to give you
exact recommandations as to the amount of detergent
that should be used for any one wash.
Therefore we recommend that you use approximately
1/3 less than the detergent manufacturer recommends on
the packet or bottle, making the appropriate allowances
for soft or hard water, and light or heavy soilage of
clothes. If you have judged the amount correctly you
should expect to see a soft sudsy liquid during the wash.
It is not necessary to have a head of lather on the water.

P0006

P0004

3. Measure out the fabric

softener

If required, pour fabric softener into the compartment
marked

(the amount used must not exceed the

“MAX” mark in the drawer).
Close the drawer gently.

4. Switch the machine on

To switch the machine on, press the ON/OFF button:
the mains-on light comes on.

If the programme selector dial is on the Reset O
position, three flashing dashes will be displayed. If the
programme selector dial is positioned on a wash
programme, a flashing zero appears on the display.

5. Select the required programme

Turn the programme selector dial to the desired
position: the lights corresponding to the different phases
making up the selected programme light on.

The display shows the duration of the programme.

WASH

DRY

DOOR
PREWASH

SPIN

END

RINSES

DRAIN

95º

E

60º

40º

30º

60º

40º

30º

40º

30º

40º

O

30º

COTTON

DELICATES

SYNTHETICS

WOOL

60º

SPECIAL

PROGRAMMES

40ºE

40ºE

---

0

ON / OFF

P0005

132997370_ZJD1219.qxd 5/31/01 4:42 AM Pagina 11 (Nero/Process Black pellicola)

Advertising