Zanussi ZJD1219 - Manual (Page 7)

7
7 Extra Rinse button
Can be used with all programmes except the wool
programme
. The machine performs 4 rinses instead
of 3.
This option is recommended for people who are allergic
to detergents and in areas where the water is very soft.
8 Soil level
By depressing this button it is possible to select a
programme more or less intensive according to the soil
level of your laundry.
The corresponding pilot light comes on.
Intensive
For heavy soiled laundry. The washing phase will be
prolonged by about 10 minutes. It can be selected for
cotton and synthetic items.
This option cannot be selected with the Economy
programmes .
Normal
For normally soiled laundry. The machine is pre-set for
this function.
Quick
For lightly soiled laundry. By selecting this option the
washing time is reduced by the following number of
minutes:
53 minutes for cotton at 95° C
63 minutes for cotton at 60° C
24 minutes for synthetics
8 minutes for delicates
This option can be selected for cotton, synthetic and
delicates but not together with the Economy
programmes .
9 Drying Time button
By depressing this button you can select the desired
drying time according to the fabrics (cotton or
synthetics) you have to dry.
To select the drying time you have to push the button
until the drying time you want appears in the display.
For COTTON you can select a drying time from 10 to
130 minutes.
For SYNTHETICS you can select a time from 10 to
100 minutes.
For automatic Washing & Drying programmes the
drying time is displayed for 2 seconds, then the duration
of the programme will appear.
10 Delay Start button
The wash programme can be delayed from 1 hour up to
a maximum of 24 hours.
The button must be pressed after selecting the
programme and before pressing the START/PAUSE
button.
The figures indicating the delay appear for about 3
seconds in the display. The duration of the selected
wash programme is then displayed. One minute after
depressing the START/PAUSE button, the machine
starts its hourly countdown.
To alter or cancel the preset delay, press the
START/PAUSE button, then press the DELAY START
button until the required time is displayed or, if you
wish to cancel the delay, until the symbol 00 is displayed.
Then press the START/PAUSE button again.
When the delay is cancelled, the display shows the
duration of the wash programme previously selected.
11 Display
T he display shows the following information:
Cancelling - Duration of the programme - Drying
time - Delayed start - Incorrect option selection -
Alarm code - End of programme
If a programme has been cancelled - programme
selector dial on position O - three flashing dashes
appear on the display.
Now you can select a new programme.
After selecting a programme, the duration is displayed
in hours and minutes (for example 2.05).
Duration of the selected programme
---
Cancelling
132997370_ZJD1219.qxd 5/31/01 4:42 AM Pagina 7 (Nero/Process Black pellicola)