Zanussi ZJD1219 - Manual (Page 6)

1 Detergent dispenser drawer
2 Mains-on light
This light comes on when the ON/OFF button is
pressed, and goes out when it is pressed again.
3 ON/OFF button
Press this button to switch the machine on. Press it
again to switch the machine off.
Programme Option buttons
Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before depressing the
START/PAUSE button.
When these buttons are pressed, the corresponding pilot
lights come on. When they are pressed again, the pilot
lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds and the message
Err
is displayed.
4 Prewash button
The machine performs a prewash cycle at 30°C max.
The prewash cycle ends with a short spin at 650 r.p.m.
in programmes for Cotton and Synthetics, and with
emptying of the water for Delicates.
This option is not available with the wool programme.
For use when washing heavily soiled laundry.
5 Spin Speed button
Press this button to reduce the maximum speed of the
final speed proposed by the machine for the selected
programme or to select position NO SPIN.
The light corresponding to the selected option
illuminates.
6
The Control Panel
1 2 3 4 5 6 7 8 9 10 1213 14
11
Z J D . 1 2 1 9
1200
900
700
500
START
PAUSE
WASH
DRY
DRYING
TIME
DOOR
PREWASH
SPIN
END
EXTRA
RINSE
WASH TIME
DELAY
START
RINSES
95º
E
60º
40º
30º
60º
40º 30º 40º 30º
40º
O
30º
COTTON
DELICATES SYNTHETICS
WOOL
60º
SPECIAL PROGRAMMES
40ºE
40ºE
SOIL
LEVEL
INTENSIVE
NORMAL
QUICK
NO SPIN DRAIN
ON / OFF
SPIN SPEED PREWASH RINSE HOLD
The following speeds are available for the different
fabrics:
• Cotton, linen:
500/700/900 max 1200 r.p.m.
• Synthetics, wool:
500/700 max 900 r.p.m.
• Delicates:
500 max 700 r.p.m.
By selecting this option, the spinning phases are
suppressed.
This function is not available for cotton and linen.
To be selected for extremely delicate items.
6 Rinse Hold button
When RINSE HOLD option is selected, the last rinse
water is not emptied out, to prevent the fabrics from
creasing. When the programme has finished, the pilot
light of the START/PAUSE button flashes to indicate
that the water must be emptied out.
To empty out water there are 3 possibilities:
• Select programme
(draining):
The water is emptied out without spinning.
Attention! Before selecting programme the selector
dial has to be positioned on O (cancelling).
• Depress START/PAUSE button: after emptying, the
machine performs the spin cycle corresponding to the
type of fabric previously selected.
• Select the spin speed by means of the relevant button
and then depress the START/PAUSE button.
The machine empties itself after 18 hours if no action is
taken.
The RINSE HOLD option CANNOT be selected for
the automatic Washing & Drying programme.
No Spin
Spin speed
132997370_ZJD1219.qxd 5/31/01 4:42 AM Pagina 6 (Nero/Process Black pellicola)