Zanussi ZJD1219 - Manual (Page 8)

8
The duration is calculated automatically on the basis of
the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining is
updated every minute.
The selected drying time is displayed in minutes.
After starting the programme, the remaining time is
updated every minute.
The selected delay (24 hours max) set by means of the
relevant button appears on the display for 3 seconds,
then the duration of the previously selected programme
is displayed.
The countdown is updated every hour.
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed for
2 seconds.
Incorrect option selection
DELAY
START
Delayed start
105
Drying time
2.05
In the event of operating problems, some alarm codes
can be displayed, for example
E20
(see paragraph
“Something not working”).
When the programme has finished a flashing zero is
displayed. The door can be opened.
If you have selected the Rinse Hold option, the zero will
not flash.
12 START/PAUSE button
This button has three functions:
Start - Pause - Draining of water / Spin.
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
Start
0
End of programme
E20
Alarm codes
132997370_ZJD1219.qxd 5/31/01 4:42 AM Pagina 8 (Nero/Process Black pellicola)