Zanussi ZJD1219 - Manual (Page 9)

9
If you have selected the delayed start, the machine
begins its countdown. The duration of the programme or
the delay appears on the display.
To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts
to flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.
By depressing the Start/Pause button
• The water of programme
(Soak) is emptied out
• The water of the last rinse on programmes with
RINSE HOLD option is emptied out and the laundry
is spun.
13 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running phase
pilot light stays on. When the programme has finished,
the END pilot light comes on.
The DOOR light indicates if the door can be opened:
• Light on: the machine is functioning, but the door can
be opened (see page 10).
• Light off: the door can be opened (at the end of the
cycle) or cannot be opened because the machine is
functioning.
• Light blinking: the machine is in PAUSE and the
door cannot be opened.
WASH
DRY
DOOR
PREWASH
SPIN
END
RINSES
DRAIN
Draining of water/spin
Pause
14 Programme selector dial
The selector is divided into 5 sections:
• Cotton
• Synthetics
• Delicates
• Wool (hand
washing)
• Special programmes
• Reset programme O
The selector dial can be turned either clockwise or
anticlockwise.
Position E corresponds to the ENERGY SAVING
programme and position
to “cold wash”.
Position corresponds to the drying programme.
At the end of the programme the selector dial must
be turned to position O (reset).
Functions
End of programme
When the door locked light has gone out, the door can
be opened. The END light on the programme progress
display illuminates.
Turn the programme selector dial to O.
Switch the machine off and remove the laundry.
Altering a programme
You can alter the programme before it starts.
When the programme has started, you can only reset it
by turning the programme selector dial to O and then
you can select the new programme.
Start it by depressing the START/PAUSE button.
Interrupting a programme
Depress the START/PAUSE button to interrupt a
programme which is running: the corresponding light
starts to flash.
Depress the same button to restart the programme.
Cancelling a programme
Turn the selector dial to O to cancel a programme
which is running. Now you can select a new
programme.
95º E
60º
40º
30º
60º
40º 30º 40º 30º
40º
O
30º
COTTON
DELICATES SYNTHETICS
WOOL
60º
SPECIAL
PROGRAMMES
40ºE
40ºE
132997370_ZJD1219.qxd 5/31/01 4:42 AM Pagina 9 (Nero/Process Black pellicola)