Xantrex Technology GT100E - Manual (Page 18)

Installation
2–2 152602
Equipment Required
• Ratchet Handle
• Extension
• Metric socket set
• Metric wrench set
• Metric hex wrench set
• Torque wrench with 0-150Nm minimum range
• Phillips Screwdriver
Unpacking the GT100E MS
To unpack the GT100E MS from the shipping pallet:
1. Remove the packing material from the MS100E.
2. Open the GT100E MS Combiner Box.
3. Remove the 8 M6 screws holding the safety cover from the box.
4. Remove the box containing GT100E MS interface assemblies.
5. Remove the manual.
6. Remove the GT100E MS combiner box power cable assembly P/N 1-
152492-01
7. Remove the GT100E MS combiner box interface cable assembly P/N
1-152493-01
8. Remove all mounting hardware from the box.
9. Remove the GT100E MS Combiner Box from the pallet.
WARNING: Equipment is Heavy
The GT100E MS combiner box weighs 82 Kg.