Xantrex Technology 1200 - Manual (Page 21)

XPower Plus Features
2–4
AC Panel
Figure 2-1 AC Panel (XPower 1750 Plus shown)
④ ④ ④ ④
⑥⑥⑥⑥
⑤ ⑤ ⑤ ⑤
⑦ ⑦ ⑦ ⑦ ⑧ ⑧ ⑧ ⑧
⑨ ⑨ ⑨ ⑨
① ① ① ①
③ ③ ③ ③ ② ② ② ②
Feature Description
➀ ➀ ➀ ➀
On/Off Switch turns the inverter’s control circuit on and off. This
switch is not a power disconnect switch. Disconnect AC and DC
power before working on any circuits connected to the inverter.
➁③ ➁③ ➁③ ➁③ ② ② ② ② Fault light is a red light indicating the inverter has shut down due
to low or high battery voltage, unit overload, or overtemperature.
③
③ ③ ③ Power light is a green light indicating the On/Off Switch is on and
AC voltage is present at the inverter’s AC outlets.
④ ④ ④ ④
INPUT VOLTAGE DISPLAY indicates battery voltage.
⑤⑥ ⑤⑥ ⑤⑥ ⑤⑥ AC Outlets: ⑤ ⑤ ⑤ ⑤ 2-Prong and ⑥ ⑥ ⑥ ⑥ 3-Prong XPower 1200 Plus delivers
a combined total of 1000 watts of continuous AC power across three
outlets. XPower 1750 Plus delivers a combined total of 1500 watts of
continuous AC power across three outlets.
⑦ ⑦ ⑦ ⑦ OUTPUT POWER INDICATOR
• The indicator should be in the green area for continuous
operation.
• If the indicator is in the yellow area, the inverter will operate for
several minutes and then shut down.
• If the indicator is in the red area, the inverter has reached the
maximum allowable power and is close to the output power
shutdown limit.
⑧ ⑧ ⑧ ⑧ Remote Switch Jack (not shown) is on the bottom of the inverter,
and it is the connection point for the optional Remote On/Off Switch.
⑨ ⑨ ⑨ ⑨ Mounting Flanges allow you to mount the inverter permanently.