15 configuring dial backup, Figure 75 network > wan > traffic redirect, Table 43 network > wan > traffic redirect – ZyXEL Communications 5 Series User Manual
Page 171

ZyWALL 5/35/70 Series User’s Guide
Chapter 8 WAN Screens
171
Figure 75 NETWORK > WAN > Traffic Redirect
The following table describes the labels in this screen.
8.15 Configuring Dial Backup
Click NETWORK > WAN > Dial Backup to display the Dial Backup screen. Use this
screen to configure the backup WAN dial-up connection.
Table 43 NETWORK > WAN > Traffic Redirect
LABEL
DESCRIPTION
Active
Select this check box to have the ZyWALL use traffic redirect if the normal WAN
connection goes down.
Backup
Gateway IP
Address
Type the IP address of your backup gateway in dotted decimal notation. The ZyWALL
automatically forwards traffic to this IP address if the ZyWALL's Internet connection
terminates.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.