ZyXEL Communications 5 Series - Manual (Page 543)

ZyWALL 5/35/70 Series User’s Guide
Chapter 31 Maintenance 543
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyWALL again.
Figure 295 Firmware Upload In Process
The ZyWALL automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 296 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the HOME screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.
Figure 297 Firmware Upload Error