Smt menu 1 - general setup, 1 introduction to general setup, 2 configuring general setup – ZyXEL Communications 5 Series User Manual

Page 557: Chapter 33 smt menu 1 - general setup, Figure 309 menu 1: general setup (router mode), Table 200 menu 1: general setup (router mode)

Advertising
background image

ZyWALL 5/35/70 Series User’s Guide

Chapter 33 SMT Menu 1 - General Setup

557

C

H A P T E R

3 3

SMT Menu 1 - General Setup

Menu 1 - General Setup contains administrative and system-related information.

33.1 Introduction to General Setup

Menu 1 - General Setup contains administrative and system-related information.

33.2 Configuring General Setup

1 Enter 1 in the main menu to open Menu 1 - General Setup.

2 The Menu 1 - General Setup screen appears, as shown next. Fill in the required fields.

Figure 309 Menu 1: General Setup (Router Mode)

The following table describes the fields in this menu.

Menu 1 - General Setup

System Name=

Domain Name=

Device Mode= Router Mode

Edit Dynamic DNS= No

Press ENTER to Confirm or ESC to Cancel:

Table 200 Menu 1: General Setup (Router Mode)

FIELD

DESCRIPTION

System Name

Choose a descriptive name for identification purposes. It is recommended you enter
your computer’s “Computer name” in this field. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes “-” and
underscores "_" are accepted.

Domain Name

Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP. You can go to menu 24.8 and type "sys
domain name" to see the current domain name used by your router.

The domain name entered by you is given priority over the ISP assigned domain
name. If you want to clear this field just press [SPACE BAR] and then [ENTER].

Device Mode

Press [SPACE BAR] and then [ENTER] to select Router Mode.

Advertising