ZyXEL Communications 5 Series - Manual (Page 695)

ZyWALL 5/35/70 Series User’s Guide
Chapter 50 IP Policy Routing 695
Figure 436 Menu 25.1.1: IP Routing Policy Setup
The following table describes the fields in this screen.
50.3 IP Policy Routing Example
If a network has both Internet and remote node connections, you can route Web packets to the
Internet using one policy and route FTP packets to a remote network using another policy. See
the next figure.
Route 1 represents the default IP route and route 2 represents the configured IP route.
Menu 25.1.1 - IP Routing Policy Setup
Apply policy to packets received from:
LAN= No
DMZ= No
WLAN= No
ALL WAN= Yes
Selected Remote Node index= N/A
Press ENTER to Confirm or ESC to Cancel:
Table 257 Menu 25.1.1: IP Routing Policy Setup
FIELD DESCRIPTION
LAN/DMZ/WLAN/
ALL WAN Press [SPACE BAR] to select Yes or No. Choose Yes and press [ENTER] to apply
the policy to packets received on the specific interface(s).
Selected Remote
Node index If you select No in the ALL WAN field, enter the number of the WAN port.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm…" to
save your configuration, or press [ESC] at any time to cancel.