4 system reports specifications, 3 idp threat reports screen, Figure 273 reports > threat reports > idp – ZyXEL Communications 5 Series User Manual
Page 496: Table 158 report specifications
Advertising
ZyWALL 5/35/70 Series User’s Guide
496
Chapter 29 Reports
29.2.4 System Reports Specifications
The following table lists detailed specifications on the reports feature.
29.3 IDP Threat Reports Screen
Click REPORTS > THREAT REPORTS to display the Threat Reports IDP screen. This
screen displays IDP (Intrusion Detection and Prevention) statistics.
Figure 273 REPORTS > THREAT REPORTS > IDP
Table 158 Report Specifications
LABEL
DESCRIPTION
Number of web
sites/protocols
or ports/IP
addresses listed:
20
Hit count limit:
Up to 2
32
hits can be counted per web site. The count starts over at 0 if it passes four
billion.
Bytes count
limit:
Up to 2
64
bytes can be counted per protocol/port or LAN IP address. The count starts
over at 0 if it passes 2
64
bytes.
Advertising