3 back to factory defaults, 12 restart screen, Figure 301 configuration upload error – ZyXEL Communications 5 Series User Manual
Page 546: Figure 302 reset warning message
Advertising
ZyWALL 5/35/70 Series User’s Guide
546
Chapter 31 Maintenance
Figure 301 Configuration Upload Error
31.11.3 Back to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the
ZyWALL to its factory defaults as shown on the screen. The following warning screen
appears.
Figure 302 Reset Warning Message
You can also press the hardware RESET button to reset the factory defaults of your
ZyWALL. Refer to
for more information on the RESET button.
31.12 Restart Screen
System restart allows you to reboot the ZyWALL without turning the power off.
Click MAINTENANCE > Restart. Click Restart to have the ZyWALL reboot. Restart is
different to reset; (see
) reset returns the device to its default
configuration.
Advertising