XiNCOM XC-DPG603 - Manual (Page 16)

→
Chapter 3 - Advanced Port
Overview
Port Options contains some options which can be set on either or both WAN ports. For most situations, the
default values are satisfactory.
Load Balance screen is only functional if you are using both WAN ports. It allows you to determine the
proportion of WAN traffic sent through each port.
Advanced PPPoE setup is required if you wish to use multiple sessions on one or both of the WAN ports. It
can also be used to manually connect or disconnect a PPPoE session. Otherwise, this screen can be ignored.
Advanced PPTP setup is required if using the PPTP connection method.
XC-DPG603
Twin WAN DNS
IP
VPN Gateway
Chapter Contents
• Overview
• Port Options
• Load Balance
• Advanced PPPoE
• Advanced PPTP
16