Chapter 2: basic setup, Chapter 2 - basic setup, Xc-dpg603 – XiNCOM XC-DPG603 User Manual

Page 9

Advertising
background image

Chapter 2 - Basic Setup

Overview

Basic setup of your XC-DPG603 wil involve the following steps:

1. Connect the XC-DPG603 to one (1) PC and configure it to your existing LAN.
2. Connecting one or two Broadband Modems to your XC-DPG603.
3. Configuring the XC-DPG603 for Interent Access.
4. Configuring all PCs on your LAN to use the XC-DPG603.

Requirements:

• One or two Broadband modems (T1, xDSL, Cable, and Satillite) with an active account from your ISP(s).
• Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.
• TCP/IP network protocol must be installed on all PCs.

XC-DPG603

Twin WAN DNS

IP

VPN Gateway

Chapter Contents

• Overview
• Procedure

1. Configuring your LAN
2. Connecting Broadband Modems
3. Configuring for Internet Access
4. Configuring your LAN PCs

TCP/IP Enabled PCs

Broadband Modems

CAT5 Ethernet Cables

9

Advertising