Chapter 9: management assistant, Chapter 9 - management assistant, Xc-dpg603 – XiNCOM XC-DPG603 User Manual

Page 43: Twin wan dns ip vpn gateway chapter contents

Advertising
background image

Chapter 9 - Management Assistant

SNMP - Simple Network Management Protocol

This section is to compliment any SNMP (Simple Network Management Protocol) software installed on your PC. If

you have SNMP software, you can use a standard MIB II file with the XC-DPG603.

Settings - SNMP

System Information

Contact Person - The name of the person responsible for this device

Device Name - Enter a name for the XC-DPG603

Physical Location - The location of the XC-DPG603

Trap Targets

Enter the IP address of any targets (PCs running SNMP software) to which you want traps to be sent. All traps are

level 1.

Email Alert

The email alert feature will send an warning email to the system administrator and inform that one of the WAN

ports was disconnected.

Email Alert

Enable – This will enable email alert to send an warning email when WAN port was disconnected.

Disable – This will disable email alert not to send an warning email when WAN port was

disconnected.

Email Sender Address

Email Sender Address

An email address that sends a warning email to a recipient. The warning email will inform the

recipient if there is any problem on either or both WAN ports.
Email (SMTP) Server Address

This sets the email server to where the warning email will be sent to.

For example: mail.domain.com.
Email (SMTP) server user name

This authenticates the user name of email sender (optional).
Email (SMTP) server password

This is the user password

XC-DPG603

Twin WAN DNS

IP

VPN Gateway

Chapter Contents

• SNMP
• Email Alert
• Syslog
• Upgrade Firmware

43

Advertising