XiNCOM XC-DPG603 - Manual (Page 29)

Advanced Features (continued)
Using Remote Web-based Setup
To connect to the XC-DPG603 from a remote PC via the Internet:
1. Ensure that both your PC and the XC-DPG603 are connected to the Internet.
2. Start your Web Browser.
3. In the Address bar enter:
HTTP:// (Internet IP Address of the XC-DPG603)
The Port number is also required. (After the IP Address, enter “:” followed by the port number.)
e.g.: HTTP://123.123.123.123:8080
• This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.
• If using the Dynamic DNS feature, you can connect using the domain name allocated to you.
e.g.: HTTP://my_domain_name.dyndns.org:8080
29