Chapter 10: operation & status, Chapter 10 - operation & status, Xc-dpg603 – XiNCOM XC-DPG603 User Manual

Page 47: Twin wan dns ip vpn gateway chapter contents

Advertising
background image

Chapter 10 - Operation & Status

Operation & Status Overview

Once both the XC-DPG603 and the PCs are configured, operation is automatic. However, there are some

situations where additional Internet configuration may be required (Refer to Chapter 4 - Advanced Features for

further details)

System Status

WAN Information

Connection Status – Current status – either “Connected” or “Not connected”.

Connection Type – The type of connection used – DHCP, Fixed IP, PPPoE, or PPTP.

Force Renew button– Only available when using a dynamic IP address (DHCP). Clicking this button will perform a DHCP

“Renew” transaction with the ISP’s DHCP server. This will extend the period for which the current WAN IP address is

allocated to you.

IP Address – The IP address of the XC-DPG603 when seen from the Internet. This IP Address is allocated by the ISP

(Internet Service Provider).

Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.

Domain Name IP Address – The address of the current DNS (Domain Name Server).

MAC Address – The MAC (physical) address of the XC-DPG603 when seen from the Internet.

LAN Information

IP Address – The LAN IP Address of the XC-DPG603.

Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.

MAC Address – The MAC (physical) address of the XC-DPG603 when seen from the local LAN.

DHCP Server – The status of the DHCP Server function - either “Enabled” or “Disabled”.

Device Information Firmware Version – Version of the Firmware currently installed.

NAT – Status of the NAT feature – either “Enable” or “Disable”.

Load Balance – Status of the Load Balance feature – either “Enable” or “Disable”.

Virtual Server – Status of the Virtual Server feature – either “Enabled” or “Disabled”.

Special Applications – Status of the Special Applications feature – either “Enabled” or “Disabled”.

DMZ – Status of the DMZ feature – either “Enabled” or “Disabled”.

Block URL – Status of the Block URL feature – either “Enable” or “Disable”.

Hardware ID – The manufacturers ID for this particular device.

Device Statistics

System UpTime – The time since the system of a device was last re-initialized.

CPU Usage – The current usage percentage of CPU.

Memory Usage – The current usage percentage of Memory (Heap & Queue).

Buttons

Refresh – Update the data on screen.

Restart – Restart (reboot) the XC-DPG603.

Restore Factory Defaults – This will delete all existing settings, and restore the factory default settings.

XC-DPG603

Twin WAN DNS

IP

VPN Gateway

Chapter Contents

• System Status
• Restore Factory Defaults
• WAN Status
• LAN Status

47

Advertising