XiNCOM XC-DPG603 - Manual (Page 44)

Management Assistant
Email Alert (continued)
Email (SMTP) Server
Address
This field sets the email sever’s address for the warning email will be sent to. (Email Alert must be
enabled)
For example: mail.domain.com
Email Recipient Address This field sets the email address for the warning email will be sent to. This is usually the system
administrator email address.
For example: [email protected]
Excessive Ping
Notification
This feature is useful to prevent ICMP attacks from WAN or LAN. It will drop the packets if the ping times
are exceeding the threshold value. A notification email will be sent to the administrator.
Syslog
This feature can send real time system information on a web page or to a specified PC.
Syslog Configuration
Syslog Configuration allow you where to send system information to another machine or not. There are up to three
machines you can choose to send your system log to.
Message Status
Messages send only keep when “keep send message” checked. The XC-DPG603 keeps last 100 messages in the
RAM. These messages will clear when reboot or powered off.
Syslog Configuration
Syslog Global Enable – This allows the XC-DPG603 to send system log messages to other PCs.
Keep Sent Messages Enable – When enabled the XC-DPG603 will keep sent messages. If not enabled, sent
messages will be deleted.
Syslog Server • IP address: Up to 3 syslog servers can be used.
• Enable: You can enable or disable each server temporarily.
• Port: If your syslog server does not use the default port, you can change it.
• Log Priority Level: The syslog messages are divided into 8 levels, from Emergency to
Debug level. The lower the level, the less messages will be generated. Emergency is the
lowest priority level and Debug is the highest one.
44