ZyXEL Communications ES-2108 - Manual (Page 157)

ES-2108 Series User’s Guide
Chapter 27 Introducing the Commands 157
enable Accesses Enable (or privileged) mode.
erase running-config Resets to the factory default settings.
exit Exits Enable (or privileged) mode.
help Displays help information.
history Displays a list of command(s) that you
have previously executed.
logout Exits Enable (or privileged) mode.
mac-flush Clears the MAC address table.
<port-num> Removes all learned MAC address on the
specified port(s).
no arp Clears the ARP table.
interface Clears interface statistics.
logging Disables syslog logging.
ping <IP|host-name> Sends Ping request to an Ethernet
device.
[vlan <vlan-
id>][..]
Sends Ping request to an Ethernet device
in the specified VLAN(s).
help Displays command help information.
reload config Restarts the system.
show cluster Displays cluster management status.
candidates Displays cluster candidate information.
member Displays the MAC address of the cluster
member(s).
member mac <mac-
addr>
Displays the status of the cluster
member(s).
members config Displays the configuration of the cluster
member(s).
diffserv Displays general DiffServ settings.
garp Displays GARP information.
https Displays the HTTPS information.
certificate Displays the HTTPS certificates.
key <rsa|dsa> Displays the HTTPS key.
session Displays current HTTPS session(s).
timeout Displays the HTTPS session timeout.
interface <port-
number>
Displays current interface status.
interfaces config
<port-list>
Displays current interface configuration.
bandwidth-
control
Displays bandwidth control settings.
Table 57 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION