ZyXEL Communications ES-2108 - Manual (Page 161)

ES-2108 Series User’s Guide
Chapter 27 Introducing the Commands 161
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Configures a static MAC
address forwarding rule.
inactive Disables a static MAC address
forwarding rule.
mirror-filter egress mac <mac-addr> Sets port mirroring for the MAC
address on the outgoing traffic.
type
<all|dest|src>
Sets the direction of the
outgoing traffic for port
mirroring.
ingress mac <mac-addr> Sets port mirroring for the MAC
address on the incoming traffic.
type
<all|dest|src>
Sets the direction of the
incoming traffic for port
mirroring.
mirror-port Enables port mirroring.
<port-num> Enables port mirroring on a
specified port.
mode zynos Changes the CLI mode to the
ZyNOS format.
multi-login Enables multi-login.
no bandwidth-control Disable bandwidth control on
the switch.
cluster Disables cluster management
on the switch.
cluster member <mac-address> Removes the cluster member.
diffserv Disables the DiffServ settings.
https timeout Resets the session timeout to
the default of 300 seconds.
igmp-snooping Disables IGMP snooping.
ip Sets the management IP
address to the default value.
route <ip> <mask> Removes a specified IP static
route.
route <ip> <mask>
inactive
Enables a specified IP static
route.
lacp Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
logins Disables login access to the
specified name.
Table 58 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION