ZyXEL Communications ES-2108 - Manual (Page 174)

ES-2108 Series User’s Guide
174 Chapter 28 Command Examples
Figure 104 show interface Command Example
28.2.5 show mac address-table
Syntax:
show mac address-table <all <sort>|static>
Where
<sort> = Specifies the sorting criteria (MAC, VID or port).
This command displays the MAC address(es) stored in the switch. The following example
shows the MAC address table.
ras# show interface 2
Port Info Port NO. :2
Link :100M/F
Status :FORWARDING
LACP :Disabled
TxPkts :1744
RxPkts :12
Errors :0
Tx KBs/s :0.64
Rx KBs/s :0.0
Up Time :1:00:40
TX Packet Tx Packets :1744
Multicast :1744
Broadcast :0
Pause :0
RX Packet Rx Packets :12
Multicast :12
Broadcast :0
Pause :0
TX Collision Single :0
Multiple :0
Excessive :0
Late :0
Error Packet RX CRC :0
Runt :0
Distribution 64 :12
65 to 127 :0
128 to 255 :0
256 to 511 :0
512 to 1023 :0
1024 to 1518 :0
Giant :0
ras#