Revo RETRT2812-1 - Manual (Page 11)

USER’S MANUAL
•
Select one of the following 5 modes, as appropriate for your
purpose. ATW: Select this when the color temperature is between 1,700˚K
and 11,000˚K.
•
OUTDOOR: Select this when the color temperature is between 1,700˚K and 11,000˚K.
(sodium light inclusion)
•
INDOOR: Select this when the color temperature is between 4,500˚K and 8,500˚K.
•
MANUAL: Select this to fine-tune White Balance manually. Set White Balance first by using the
ATW or AWC mode. After that switch to MANUAL mode, fine-tune the White Balance and then
press the Function Setup switch.
•
AWC→SET: To find the optimal luminance level for the current environment, point the
camera towards a sheet of white paper and press the Function Setup switch. If the environment
changes, readjust it.
■ White Balance may not work properly under the following conditions. In this case
select the AWC mode.
☞
NOTE
■ when the color temperature of the environment surrounding the subject is out of the
control range (e.g. clear sky or sunset).
■ when the ambient illumination of the subject is dim.
■ If the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
SSDR Setting
●
SSDR illuminates darker spots of an image while retaining the same light level for brighter
spots to even out the overall brightness of images with high contrast between bright and
dark spots.
MA N SETUP
1 LENS DC
2 EXPOSURE
3 WH TE BAL
ATW
4 SSDR OFF .
1. When the SETUP menu screen is displayed, select 'SSDR' by using the switch so
that the arrow indicates 'SSDR'.
2. Use the switch to change the SSDR level according to the contrast between bright
and dark areas.