Revo RETRT2812-1 - Manual (Page 9)

USER’S MANUAL
- FOCUS ADJ: To adjust the DC lens focus correctly, you must activate the Focus Settings
mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and
then deactivate the settings mode.
■ If color rolling occurs when using a DC lens, set Shutter to Fixed (---).
☞
NOTE
Exposure Setting
●
MA N SETUP
1 LENS DC
2 EXPOSURE
3 WH TE BAL
ATW
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the
Function Setup Switch.
2. Select a desired mode using the Function Setup switch.
EXPOSURE SETUP
1 BR GHTNESS 25
2 SHUTTER
3 AGC
H GH
4 SENS UP OFF
5 RETURN
-
- - -
◆
SHUTTER: You can select either auto or manual shutter.
* --- : Shutter speed is fixed at 1/60sec(1/50sec)
* ESC: Select this to control the shutter speed automatically. If ESC is selected, the shutter
speed is automatically controlled depending on the ambient illumination of the subject.
* MANUAL: You can control shutter speed manually.
(NTSC MODEL: 1/60~1/120,000, PAL MODEL: 1/50~1/120,000)
* A.FLK : Select this when you see picture flicker, this can happen when the frequency of the
local lighting clashes with the camera.
■ When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
☞
NOTE
9