Revo RETRT2812-1 - Manual (Page 14)

USER’S MANUAL
3. Set the DNR3 mode to 'ON' and press the Function Setup switch. Then you
can adjust the noise reduction level.
■ You cannot set the DNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’.
■ When adjusting the noise reduction level in the DNR3 mode, remember that the higher the
level set, the more the noise level will be reduced, as will the brightness of the image.
☞
NOTE
Day/Night Setting
●
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT 'by using the
Function Setup switch so that the arrow indicates 'DAY/NIGHT'.
MA N SETUP
1 LENS
2 EXPOSURE
3 WH TE BAL
4.SSDR
5 BACKL GHT
6 DNR3
7 DAY/N GHT
8 SPEC AL
9 EX T
DC
ATW
OFF
OFF
ON
AUTO
SAVE
2. Select a desired mode using the Function Setup Switch according to the picture
display you want.
•
COLOR: The picture is always displayed in color.
•
B/W: The picture is always displayed in black and white.
- BURST MODE: You can turn on or off the burst signal on B/W mode.
B/W MODE SETUP
1 BURST MODE ON
RETURN 2.
14